deutsch |

Information material

Information material
All relevant information available as download and online order more...

eService

eService
Your order data online: production status, expected completion date, documents, certifications and lots 
more... | Register

Product range online

Product range online
The product range of Salzgitter Flachstahl in direct access more...

Newsletter

Newsletter
Latest news and important dates for Salzgitter Flachstahl e-mailed to you more...

Services

Home > Products > Hot-rolled products > Steel grades > Non-alloy structural steels
Non-alloy structural steels

Non-alloy structural steels

Usage

These general structural steel grades are characterised by a minimum yield strength of 185 - 450 MPa. Suitability for coldforming such as bending, folding, bordering and flanging etc. can be ordered separately. The user of these steel grades must make sure that his calculation, design and processing methods are appropriate for the material. The welding technique used must be suitable for the intended application and comply with the state-of-the-art.

With distinctly closer chemical composition values and mechanical properties, the steel grades of the S235 - S355 series are used as material for wheels of passenger cars, lorries and other vehicles.

For laser cutting, we offer our Salzgitter 240 special grade.

For the hydroforming process, we have developed the special grades S280IHU and S320IHU.

Standards

Europe Material no. D F I GB E USA J FK1)
EN
10025-2		   DIN
17100		 NFA
35-501		 UNI
7070		 BS
4360		 UNE
36 080		 ASTM JIS G
3101		  
S235JR 1.0038 St 37-2 E 24-2 Fe 360 B - AE 235 B A 283 C - A 1011 Gr. 33 - A
S235J0 1.0114 RSt 37-3 U E 24-3 Fe 360 C 40C AE 235 C - - A
S235J2 1.0117 St 37-3 N E 24-4 Fe 360 D 40D AE 235 D - - A
Salzgitter 240 - - - - - - - - A
S275JR 1.0044 St 44-2 E 28-2 Fe 430 B 43B AE 275 B A 1011 Gr. 40 SS 400 A
S275J0 1.0143 St 44-3 U E 28-3 Fe 430 C 43C AE 275 C - - A
S275J2
1.0145 St 44-3 N E 28-4 Fe 430 D 43D AE 275 D A 633 Gr. A - A
S280IHU - - - - - - - - A
S320IHU - - - - - - - - A
S355JR 1.0045 - E 36-2 Fe 510 B 50B AE 355 B A 678 Gr. A SS 490 B
S355J0 1.0553 St 52-3 U E 36-3 Fe 510 C 50C AE 355 C - - B
S355J2 1.0577 St 52-3 N - Fe 510 D 50D AE 355 D A 573 Gr. 70 - B
S355K2
1.0596 - E 36-4 - 50 DD - - - B
E295 1.0050 St 50-2 A 50-2 Fe 490 - A 490 - SS 50 B
E335 1.0060 St 60-2 A 60-2 Fe 590 - A 590 - - B
E360 1.0070 St 70-2 A 70-2 Fe 690 - A 690 - - B

1) FK = Tensile strength class
top of page

Chemical composition in percent by weight [%] (Heat analysis)

Grade C Si Mn P S N 1) Cu 2) CE 3)
  max. max. max. max. max. max. max. max.
S235JR 0.17 - 1.40 0.035 0.035 0.012 0.55 0.35
S235J0 0.17 - 1.40 0.030 0.030 0.012 0.55 0.35
S235J2 0.17 - 1.40 0.025 0.025 - 0.55 0.35
Salzgitter 240 0.12 0.03 0.90 0.018 0.010 - - -
S275JR 0.21 - 1.50 0.035 0.035 0.012 0.55 0.40
S275J0 0.18 - 1.50 0.030 0.030 0.012 0.55 0.40
S275J2 0.18 - 1.50 0.025 0.025 - 0.55 0.40
S280IHU 0.10 0.20 1.20 0.020 0.010 - - -
S320IHU 0.18 0.20 1.25 0.020 0.010 - - -
S355JR 0.24 0.55 1.60 0.035 0.035 0.012 0.55 0.45
S355J0 0.20 0.55 1.60 0.030 0.030 0.012 0.55 0.45
S355J2 0.20 0.55 1.60 0.025 0.025 - 0.55 0.45
S355K2 0.20 0.55 1.60 0.025 0.025 - 0.55 0.45
E295 - - - 0.045 0.045 0.012 - -
E335 - - - 0.045 0.045 0.012 - -
E360 - - - 0.045 0.045 0.012 - -



1) The maximum nitrogen content shall not apply if the total aluminium content of the steel is at least 0.020 % or if it contains enough other nitrogenfixing elements.

2) Cu content of more than 0.04% can cause hot shortness during hot forming.

3) maximum carbon equivalent value
    CE = C + Mn ⁄6 + (Cr + Mo + V) ⁄5 + (Cu + Ni) ⁄15

top of page

Mechanical properties1)

Grade Yield strength2)
 Tensile strength2)
 Min. notch impact energy3) Temperature
  MPa MPa J °C
  e ≤ 16 e > 16 e < 3 e ≥ 3    
S235JR ≥ 235 ≥ 225 360 - 510 360 - 510 27  20
S235J0 ≥ 235 ≥ 225 360 - 510 360 - 510 27    0
S235J2
≥ 235 ≥ 225 360 - 510 360 - 510 27 -20
Salzgitter 240 240 - 320 - 360 - 440 360 - 440 - -
S275JR ≥ 275 ≥ 265 430 - 580 410 - 560 27  20
S275J0 ≥ 275 ≥ 265 430 - 580 410 - 560 27    0
S275J2
 ≥ 275 ≥ 265 430 - 580 410 - 560 27 -20
S280IHU 280 - 360 - 400 - 480 400 - 480 - -
S320IHU 320 - 400 - 440 - 520 440 - 500 - -
S355JR ≥ 355 ≥ 345 510 - 680 470 - 630
 27  20
S355J0 ≥ 355 ≥ 345 510 - 680 470 - 630 27    0
S355J2
≥ 355 ≥ 345 510 - 680 470 - 630 27 -20
S355K2
≥ 355 ≥ 345 510 - 680 470 - 630 40 -20
E295 ≥ 295 ≥ 285 490 - 660 470 - 610 -    -
E335 ≥ 335 ≥ 325 590 - 770 570 - 710 -    -
E360 ≥ 360 ≥ 355 690 - 900 670 - 830 -    -


1) The tensile test values given in the table apply to longitudinal samples; in case of strip and sheet steel of widths of ≥ 600 mm they apply to transverse samples. For the steel grades Salzgitter 240, S280IHU;and S320IHU, the values apply irrespective of the width for longitudinal samples.
2) e = Nominal thickness in mm
3) Average values of 3 samples; one individual value may fall short of the required minimum value by not more than 30 %. The sample width shall equal the product thickness if the latter is between 6 and 10 mm, the tests being performed using samples which are similar to Charpy-V samples. The values specified in the table above are to be reduced proportionally to the sample width.

top of page

Total elongation

Grade Position of samples1) Min. total elongation [%]2)
    L0 = 80 mm L0 = 5,65 √S0
    1 < e ≤ 1,5 1,5 < e ≤ 2 2 < e ≤ 2,5 2,5 < e ≤ 3 3 ≤ e ≤ 25
S235JR l/t 18/16 19/17 20/18 21/19 26/24
S235J0 l/t 18/16  19/17 20/18 21/19 26/24
S235J2 l/t 18/16 19/17 20/18 21/19 26/24
Salzgitter 240 l 24  24 24 24 30
S275JR l/t 16/14 17/15 18/16 19/17 23/21
S275J0 l/t 16/14  17/15 18/16 19/17 23/21
S275J2 l/t 16/14 17/15 18/16 19/17 23/21
S280IHU l 27  27 27 27 323)
S320IHU l 27 27 27 27 323)
S355JR l/t 15/13 16/14 17/15 18/16 22/20
S355J0 l/t 15/13 16/14 17/15 18/16 22/20
S355J2
l/t 15/13 16/14 17/15 18/16 22/20
S355K2 l/t 15/13 16/14 17/15 18/16 22/20
E295 l/t 13/11 14/12 15/13 16/14 20/18
E335 l/t 9/7 10/8 11/9 12/10 16/14
E360 l/t 5/4 6/5 7/6 8/7 11/10

1) The tensile test values given in the table apply to longitudinal samples (l); in case of strip and
    sheet steel of widths of ≥ 600 mm they apply to transverse samples (t).
2) e=Nominal thickness in mm

Welding

No indications on weldability of steel grades E295, E335 and E360 are made because there are no requirements on their chemical composition.
The steel grades of the JR, J0, J2  and K2 categories are in general suitable for all welding techniques.

Condition of delivery, scope of testing and certificate

The provisions of DIN EN 10025-2, chapters 6.3 and 8 shall apply for delivery and inspection. Other inspections may be agreed.

Certificates according to DIN EN 10204 can be supplied as follows: IT, DUN, FAX, e-mail, paper.

Adobe Reader
You will need Adobe Reader to open the PDF files. You can download this software free of charge here.
top of page